
Which department and which job should your first AI agent start with?
For a company running Dynamics 365, the best first Copilot Studio agent takes over a daily job whose data is already in Dynamics 365 and whose result an employee can check. The five most common starting points are vendor invoices, purchase order follow-up, customer requests, HR questions and quote drafts. The right one depends on data readiness, work volume and the impact of a mistake.
The work Dynamics 365 does not see sits in email and PDFs
Dynamics 365 knows your purchase orders, invoices and customer cases, but not the conversations around them: a delivery date sent by email, an invoice arriving as a PDF, a problem typed into a chat. Someone has to read each one and key it in.
A Copilot Studio AI agent, a piece of software that does one defined job on your behalf, reads those messages for you. It finds the record in Dynamics 365, drafts the work and puts it up for your approval, using the data, user permissions and approval rules you already have. In Pargesoft’s Dynamics 365 projects, this email and document work is usually where a first agent pays off fastest.
- A request arrivesA vendor invoice, an order reply or a customer message
- Agent reads itFinds the matching vendor, order or customer in Dynamics 365
- Agent draftsAn invoice entry, a follow-up email or a new support case
- You approveThe process owner checks, corrects or rejects the draft
- It is postedThe approved record goes into Dynamics 365
What makes a good first agent?
A first agent should take over a job your team does by hand every day, with a result you can see quickly. To pick the right process, answer three questions:
- Which repetitive job takes your team the most time each week?
- Is the data that job needs in Dynamics 365 or another system you can reach?
- Can an employee easily check and approve what the agent does?
A process where all three answers are clear is a good place to start your first agent. It should also have a clear owner, and you should name the figure you want to improve at the start. Gartner gives finance leaders the same advice: start with a contained process where errors are visible and reversible.
Source: Gartner, August 2026
Five areas, five first agents
Most companies have work ready to hand to AI: it repeats daily, follows clear rules and its data already sits in Dynamics 365. In our projects, manufacturing and distribution companies usually see the first result in invoice entry, and service companies in service requests. Below are the areas we meet most often, sorted by how hard they are to start; each already has a first agent you can deploy today, in English or Turkish.
| Area and first agent | The problem you have | Starting difficulty | First figure to measure |
|---|---|---|---|
| HR: policy and leave assistant | Routine questions take hours of HR time | Low to medium | Number of routine questions reaching HR |
| Customer service: agent that opens and routes requests | The same requests are opened again every day | Medium | Time to open and route a request |
| Sales: quote drafting agent | Quote requests wait for days | Medium | Time to prepare a quote |
| Purchasing: order follow-up agent | Late deliveries are noticed on the due date | Medium to high | Time until a delay is noticed |
| Finance: vendor invoice agent | Invoices are keyed in by hand and work piles up at month end | Medium to high | Processing time per invoice |
The difficulty ratings are general starting assumptions; they change with data quality, the Dynamics 365 modules you use, your integrations and how much the agent is allowed to do.
Finance: Vendor invoices are processed before month end
Vendor invoices still arrive by email and are keyed in line by line, and the accounts are only checked at month end. A finance agent reads each invoice, matches it to the vendor and accounts in Business Central or Dynamics 365 Finance and leaves the accountant a draft to check. Lines that do not match are marked for review. Invoice volume is high, so the saving is large, but matching rules and data clean-up can make set-up longer than in other areas. For a company processing 1,000 invoices a month, that saves the team about 75 hours a month; the maths is below.
is how long automating the invoices you pay and send usually takes to deliver its expected benefit, according to a Gartner survey of 160 finance leaders.
Vendor invoice, vendor record, chart of accounts
Drafts the invoice, marks lines that do not match
Accountant
Purchasing: A late order shows up before the due date
Buyers spend hours asking suppliers when orders will arrive, and on a busy day a delay only shows on the due date. A purchasing agent scans late and unconfirmed orders daily, drafts a follow-up to the supplier, reads the new date in the reply and proposes the change in Dynamics 365 Supply Chain Management.
higher efficiency for procurement staff in a client case McKinsey shared, where AI agents took over finding and selecting suppliers.
Open orders, promised dates, supplier replies
Drafts follow-ups, proposes the new date
Buyer
Customer service: Repeat requests open as filled-in cases
Most requests are variations of a few familiar problems, yet each starts with a form and some land with the wrong team. The ready-made agents in Dynamics 365 Customer Service read the email or chat, open the support case with the details filled in and send it to the right team. They support Turkish today, but some of their features are still in preview, so check the language support of each feature you plan to use before set-up. We recommend keeping replies to customers under human review at first.
of common customer service issues will be resolved without human intervention by 2029, Gartner predicts.
Incoming message, customer history, previous cases
Opens the case, sends it to the right team
Service representative
HR: Routine questions are answered without tying up a specialist
How much leave do I have left? Questions with written answers take hours out of every HR day. An HR agent answers from your own policies and, connected to Dynamics 365 Human Resources, can look up an employee’s remaining leave and start a request. Personal, legal or disciplinary matters go straight to an HR specialist. If your policies live in SharePoint, Pargesoft’s own Parge Docu AI also lets employees ask those documents questions in everyday language.
of today’s HR activities will be automated by AI or performed by AI agents by 2030, according to Gartner.
Company policies, the employee’s own record
Answers the question, starts the request
HR specialist, for sensitive matters
Sales: Quote drafts arrive with prices and stock filled in
Quotes are still built by hand from prices and stock, so requests can wait for days. A sales agent reads the request, finds the customer, prices and stock in Dynamics 365 Sales or Business Central and drafts a quote for the salesperson to check and send.
a week is what AI tools save the average seller, according to Gartner.
Quote request, price list, stock
Drafts the quote
Salesperson
The first 90 days with Pargesoft: choosing, building, measuring
Pargesoft has been a Microsoft partner since 2002, running Dynamics 365 projects for enterprise resource planning (ERP) and customer relationship management (CRM) from implementation to support. We start a first agent project by reviewing your process and split the work into three months.
Together we pick the work that costs your team the most time and measure it today. We clean the data the agent will read and write the approval steps with the process owner.
We build the agent on your existing user permissions, automations (Power Automate) and Teams channels. Your team works alongside it, approving its drafts.
We compare the result with month one in a Power BI report, then extend the agent to more work or pick the next process.
All of our ready-made agents for Dynamics 365 are on our AI and Automation page, and what we have delivered in similar projects is in our success stories. You can measure your organisation’s readiness with the AI Readiness Score.
How many hours a month does an invoice agent give your team back?
Take a company that processes 1,000 vendor invoices a month at 6 minutes each: that is 100 hours of data entry. With an agent, the accountant only checks and approves drafts. If that takes 1.5 minutes per invoice:
| Situation | Per invoice | 1,000 invoices a month |
|---|---|---|
| Today: manual entry | 6 minutes | 100 hours |
| With the agent: check and approve | 1.5 minutes | 25 hours |
| Time returned to your team | 4.5 minutes | 75 hours |
These are assumptions; your real figures come from measuring today’s process in month one.
Where is your data processed, and what about GDPR or KVKK?
A correctly configured agent works with the Dynamics 365 permissions of the employee using it, so it cannot see what that employee cannot see. Administrators decide where data is stored and whether it may leave that region; Microsoft notes some AI models may process data in data centres outside the region you chose. Agree with your legal team in week one where data is stored and which model is used, under GDPR, KVKK or the rules that apply to you. Pargesoft’s GDPR and KVKK consulting team builds that review into the first steps of the project plan.
Source: Microsoft Learn, Copilot Studio model selection
Three things an agent cannot fix on its own
Scattered data. With outdated or inconsistent records, an agent prepares wrong drafts. Outdated supplier records or categories each team uses differently are the first thing to clean up; in Pargesoft projects that clean-up is part of month one.
Language support and automation limits. Copilot Studio agents can chat and write in Turkish and many other languages, and its generative answers and conversation features support them. Language support is not the same for every feature, though. Event triggers, which start an agent on their own when an email arrives or a record changes in Dynamics 365, are currently documented for English (United States) only. For non-English email, a separate flow can be built in Power Automate where needed. Most ready-made agents also need Dynamics 365 in the cloud; if you still run NAV, AX or Dynamics 365 on your own servers, moving to the cloud comes first, and Pargesoft plans that move on the same roadmap as the agent.
Source: Microsoft Learn, Copilot Studio language support
Your team’s trust. Explain early that the agent takes over repetitive work and the final decision stays with them.
Frequently asked questions
Where should a company that runs Dynamics 365 start with AI agents?
With one process that repeats every day, whose data sits in Dynamics 365 and whose result an employee can check. The three questions above pick the candidate, and the decision table shows its starting difficulty and the first figure to measure. Companies that want an easy start can begin with HR or customer service; those after the biggest time saving can begin with invoice processing.
Do we need developers to build a Copilot Studio agent?
Most first agents need no code, but someone with process and Dynamics 365 knowledge has to decide what the agent can reach, what it does alone, what it leaves for approval and whose permissions it uses. Systems outside Microsoft may also need development.
What is the difference between Copilot Studio and Power Automate?
Power Automate runs steps whose rules are fixed in advance, such as saving a file or asking for approval when an email arrives. An agent built in Copilot Studio reads the incoming message, works out what is being asked and prepares the work. The two are used together: the agent decides what needs doing, and Power Automate flows carry it out in Dynamics 365 or other systems.
How do we connect Dynamics 365 data to Copilot Studio?
Copilot Studio comes with ready-made connections for Dynamics 365 and Dataverse; through them the agent reads records and takes the actions you allow. Whose permissions a connection uses is decided at set-up, and running with the permissions of the employee using the agent is the start we recommend. Systems outside Microsoft use ready-made connectors or Power Automate flows, and some need development.
Can an agent change data in Dynamics 365 without our approval?
An agent changes data only if you allow it. For each step, you decide whether it acts alone, prepares a draft for approval or only makes a suggestion.
What data should we prepare before building the first agent?
The records the agent reads must be current and consistent: vendor records and accounts for an invoice agent, open orders and promised dates for a purchasing agent, request categories and previous cases for customer service, current policy documents for an HR agent, and the price list and stock for a sales agent. Measure how long the process takes today as well, so you can compare the result.
How long does it take to launch a first agent?
For one well-defined process, plan on about three months from choosing the process to a measured result. Most of that time goes on preparing data and agreeing approval rules.
What does the cost of a first Copilot Studio agent depend on?
Copilot Studio usage is measured in a unit Microsoft calls Copilot Credits. How many credits an agent uses depends on the number of questions and actions it handles, whether it uses AI to generate answers, whether it runs on its own and which connections it calls. Credits can be bought pay-as-you-go or in prepaid packs. That is why the cost can be calculated once it is clear what the agent will do and who will use it.
Do we need a Microsoft 365 Copilot licence for Copilot Studio?
No, it is not required. Copilot Studio can also be used with its own credit subscription, pay-as-you-go or a trial licence. According to Microsoft’s documentation, when employees with a Microsoft 365 Copilot licence use agents in Teams, Copilot Chat or SharePoint, some of that usage does not consume credits. The right model depends on who will use the agent and through which channel.
How do we measure whether an AI agent is successful?
Measure today’s process before building the agent, then measure the same figure while it runs. The first-figure column in the decision table suggests a starting point for each area, such as processing time per invoice, time until a delay is noticed or the number of routine questions reaching HR. Also check how many of the agent’s drafts are approved without changes; that share shows how much work you can hand to it.
Let’s choose your first agent together
At Pargesoft, we start by reviewing a single process with companies that run Dynamics 365. At the end, we give you the job your first agent will do and the figure to measure it by.
Get in touchWant to see where your organisation stands first? Try the AI Readiness Score.